304 STAINLESS STEEL COMPONENTS / ZIPPER GUIDANCE

SEPPES Stainless Steel High Speed Door for Cleanrooms

The SEPPES stainless steel high speed door combines 304 stainless steel guides and a head cover with a zipper-guided PVC curtain. Choose it for frequent material transfers at pharmaceutical plants, food workshops and cargo air shower entrances, with vision windows and controls matched to the route.

Pressure differential
≤50 Pa
Guides & head cover
1.8 mm
Opening speed
0.6–2 m/s
Standard curtain
1.2 mm

Share your opening dimensions and cleaning requirements for a project quote.

01 / CONFIGURATION

SEPPES Stainless Steel High Speed Door Specifications

Zipper-track reference with specified stainless steel components
SpecificationStandard configurationOptional configuration
Opening speed0.6–2 m/s—
Reference operating frequency800 cycles per day—
Curtain1.2 mm flexible curtain1.5 mm or 2.0 mm frosted curtain; 2.5 mm antistatic curtain in light blue or white.
Transparent viewing panel1.2 mm—
Side guidance and bottomZipper-track curtain guidance with a U-shaped bottom seal.—
Specified stainless steel package304 stainless steel guides and head cover, each 1.8 mm thick. Other component materials are listed in the quotation.—
Electrical supply220 V—
Backup power—UPS backup option: automatic opening within 10 seconds of a power failure.
Motor power0.75 kW below 12 m²; 1.5 kW for 12–24 m². Power selection must also respect the permitted door dimensions.—
Installation space500 mm above the opening; 150 mm on the non-motor side; 400 mm on the motor side.—
Activation and connectionsManual push button with a reverse-side single-button control; I/O connection ports and 485 communication for integration.Radar, induction loop, pull cord, remote control, Bluetooth or card access; a three-button station is also available.
Safety devicesInfrared photoelectric sensor and safety bottom edge.Safety light curtain is optional.
Motor positionLeft or right side.—
Reference pressure differentialWithin 50 Pa. Test conditions and air-leakage values are not specified in the reference configuration.—

Request a SEPPES quote

Tell us about your opening.

Blank Form (#13)

02 / PRODUCT HIGHLIGHTS

SEPPES Stainless Steel Cleanroom Door Features

Metal head cover and side guides on a SEPPES stainless steel high speed door
CLEANABLE COMPONENTS

304 Stainless Steel Guides & Cover

SEPPES specifies 1.8 mm 304 stainless steel guides and a head cover for production entrances with regular cleaning routines. Other component materials are identified in your quotation.

Close-up of the curtain edge, stainless steel side guide and bottom seal on a SEPPES cleanroom door
GUIDED CURTAIN EDGES

Zipper-Guided Vertical Travel

Zipper tracks retain the curtain edges during vertical movement. SEPPES pairs this guidance arrangement with a flexible U-shaped bottom seal for material-transfer openings.

Control panel beside an installed SEPPES stainless steel roll-up door
DRIVE & CONTROLS

German Control System

SEPPES uses a German control system for frequent door operation. I/O connections and RS-485 communication support coordination with adjacent equipment and access controls.

Transparent vision window in a blue SEPPES stainless steel high speed door
TRAFFIC VISIBILITY

Transparent Vision Window

The vision window on this SEPPES door helps operators check the opposite side before opening and coordinate material transfers through shared production passages.

B H h b1 b2
Inside view of the openingAll readings in millimeters (mm)

Installation guide

How to Measure the Door Opening

Measure from the installation side and include the readings in your SEPPES enquiry.

Measure the clear opening

Take width (B) readings at the top, middle and bottom. Measure height (H) from finished floor level at the left, center and right. Record all readings.

Check the installation space

Measure from the opening to the nearest obstruction above (h) and on each side (b1 / b2). Record the smallest clearance in each area and note the intended motor side.

Reference clearances for this door

Headroom
500 mm
Motor side
400 mm
Non-motor side
150 mm

03 / BEFORE YOU CHOOSE

Questions About
SEPPES Stainless Steel Doors

Which parts of the door are 304 stainless steel?

The SEPPES configuration shown here specifies 1.8 mm 304 stainless steel guides and a head cover. The quotation identifies the other component materials, including fixings and control enclosures, so your facility can review the complete package.

Where can this stainless steel high speed door be used?

Review this SEPPES configuration for pharmaceutical material entrances, food production workshops and cargo air shower approaches. Share your cleaning method and chemicals so the curtain, metal components, motor and controls can be checked for the actual environment.

How does zipper guidance differ from brush guidance?

Zipper tracks retain the curtain edges along the opening; the brush-guided PVC door uses double-row brushes instead. SEPPES can help compare these arrangements around your material route and maintenance routine. Any curtain reinsertion function must be specified for the selected model.

Can the door connect to access controls or adjacent equipment?

The reference SEPPES configuration provides I/O connections and RS-485 communication. Optional radar, induction loops, remote controls and card access can be reviewed alongside the required opening sequence. Send the equipment interfaces and clear opening dimensions with your enquiry.

SEPPES stainless steel high speed door with a blue PVC curtain and clear vision window
Blank Form (#13)

Start Customizing Your Industrial Door

Let's have a chat