304 Stainless Steel Guides & Cover
SEPPES specifies 1.8 mm 304 stainless steel guides and a head cover for production entrances with regular cleaning routines. Other component materials are identified in your quotation.
304 STAINLESS STEEL COMPONENTS / ZIPPER GUIDANCE
The SEPPES stainless steel high speed door combines 304 stainless steel guides and a head cover with a zipper-guided PVC curtain. Choose it for frequent material transfers at pharmaceutical plants, food workshops and cargo air shower entrances, with vision windows and controls matched to the route.
Share your opening dimensions and cleaning requirements for a project quote.
01 / CONFIGURATION
| Specification | Standard configuration | Optional configuration |
|---|---|---|
| Opening speed | 0.6–2 m/s | — |
| Reference operating frequency | 800 cycles per day | — |
| Curtain | 1.2 mm flexible curtain | 1.5 mm or 2.0 mm frosted curtain; 2.5 mm antistatic curtain in light blue or white. |
| Transparent viewing panel | 1.2 mm | — |
| Side guidance and bottom | Zipper-track curtain guidance with a U-shaped bottom seal. | — |
| Specified stainless steel package | 304 stainless steel guides and head cover, each 1.8 mm thick. Other component materials are listed in the quotation. | — |
| Electrical supply | 220 V | — |
| Backup power | — | UPS backup option: automatic opening within 10 seconds of a power failure. |
| Motor power | 0.75 kW below 12 m²; 1.5 kW for 12–24 m². Power selection must also respect the permitted door dimensions. | — |
| Installation space | 500 mm above the opening; 150 mm on the non-motor side; 400 mm on the motor side. | — |
| Activation and connections | Manual push button with a reverse-side single-button control; I/O connection ports and 485 communication for integration. | Radar, induction loop, pull cord, remote control, Bluetooth or card access; a three-button station is also available. |
| Safety devices | Infrared photoelectric sensor and safety bottom edge. | Safety light curtain is optional. |
| Motor position | Left or right side. | — |
| Reference pressure differential | Within 50 Pa. Test conditions and air-leakage values are not specified in the reference configuration. | — |
Tell us about your opening.
02 / PRODUCT HIGHLIGHTS
SEPPES specifies 1.8 mm 304 stainless steel guides and a head cover for production entrances with regular cleaning routines. Other component materials are identified in your quotation.
Zipper tracks retain the curtain edges during vertical movement. SEPPES pairs this guidance arrangement with a flexible U-shaped bottom seal for material-transfer openings.
SEPPES uses a German control system for frequent door operation. I/O connections and RS-485 communication support coordination with adjacent equipment and access controls.
The vision window on this SEPPES door helps operators check the opposite side before opening and coordinate material transfers through shared production passages.
Installation guide
Measure from the installation side and include the readings in your SEPPES enquiry.
Take width (B) readings at the top, middle and bottom. Measure height (H) from finished floor level at the left, center and right. Record all readings.
Measure from the opening to the nearest obstruction above (h) and on each side (b1 / b2). Record the smallest clearance in each area and note the intended motor side.
COMPARE THE COLLECTION



03 / BEFORE YOU CHOOSE
The SEPPES configuration shown here specifies 1.8 mm 304 stainless steel guides and a head cover. The quotation identifies the other component materials, including fixings and control enclosures, so your facility can review the complete package.
Review this SEPPES configuration for pharmaceutical material entrances, food production workshops and cargo air shower approaches. Share your cleaning method and chemicals so the curtain, metal components, motor and controls can be checked for the actual environment.
Zipper tracks retain the curtain edges along the opening; the brush-guided PVC door uses double-row brushes instead. SEPPES can help compare these arrangements around your material route and maintenance routine. Any curtain reinsertion function must be specified for the selected model.
The reference SEPPES configuration provides I/O connections and RS-485 communication. Optional radar, induction loops, remote controls and card access can be reviewed alongside the required opening sequence. Send the equipment interfaces and clear opening dimensions with your enquiry.
WhatsApp us