SEPPES / INDUSTRY APPLICATIONS

Industrial Cleanroom Doors For Your Industry.

SEPPES industrial cleanroom doors support personnel access and material transfer along your production routes. Explore door applications for pharmaceutical, electronics, food, semiconductor, medical device and laboratory environments.

SEPPES high-speed roll-up door installed along a stainless steel food production corridor
SEPPES / FOOD PRODUCTION INSTALLATION

01 / CLEANROOM APPLICATIONS BY INDUSTRY

Find Cleanroom Doors For Your Industry

Pharmaceutical Cleanroom Doors

Typical Openings

  • Material airlocks
  • Production corridors
  • Packaging rooms

What To Review

Door sequencing, cleaning access and separate personnel routes. Share the clear opening, trolley dimensions, linked-door sequence and cleaning routine.

Back to industriesDiscuss your application

Industry reference photograph. TECNIC Bioprocess Solutions, via Unsplash. Resized and displayed with responsive cropping. Original photograph · License terms.

Industrial Cleanroom Doors For Electronics

Typical Openings

  • Equipment openings
  • Component transfer
  • Clean assembly

What To Review

Equipment clearances, opening frequency and control interfaces. Share the machinery layout, largest load, available headroom and required equipment signals.

Back to industriesDiscuss your application

Industry reference photograph. Exxelia - Salle blanche Chanteloup en Brie, Exxelia Groupe / Wikimedia Commons, CC BY 3.0. Resized and cropped for display. Original photograph · License terms.

Food Processing Doors

Typical Openings

  • Processing boundaries
  • Packaging
  • Internal logistics

What To Review

Cleaning methods, moisture exposure and trolley or pallet traffic. Share the cleaning method, temperature and moisture conditions, traffic route and opening dimensions.

Back to industriesDiscuss your application

Industry reference photograph. Photo: Arno Senoner via Unsplash. Unsplash License. Cropped and resized for display. Original photograph · License terms.

Semiconductor Cleanroom Doors

Typical Openings

  • Support corridors
  • Material boundaries
  • Service access

What To Review

Room requirements, access sequence and facility-control coordination. Share the room served, pressure conditions, largest load, required access sequence and control interfaces.

Back to industriesDiscuss your application

Industry reference photograph. How ST designs and manufactures semiconductor devices, STMicroelectronics; frame extraction by Una tantum / Wikimedia Commons, CC BY 3.0. Original frame cropped by the contributor; resized and cropped for display. Original photograph · License terms.

Medical Device Cleanroom Doors

Typical Openings

  • Component entry
  • Clean assembly
  • Packaging handover

What To Review

Defined material routes, cleaning access and transfer dimensions. Share the component-transfer route, trolley size, cleaning routine and any linked-door requirements.

Back to industriesDiscuss your application

Industry reference photograph. BioClean Cleanroom, ISO Class 4 cleanroom consumables packing, CC BY 3.0, via Wikimedia Commons. Resized and displayed with responsive cropping. Original photograph · License terms.

Cleanroom Doors For Laboratories

Typical Openings

  • Sample-cart routes
  • Instrument transfer
  • Staff access

What To Review

Approach space, access permissions and instrument clearances. Share the largest instrument, sample-cart dimensions, approach space, access permissions and cleaning routine.

Back to industriesDiscuss your application

Industry reference photograph. Photo: Daniel Sone / National Cancer Institute via Unsplash. Unsplash License. Cropped and resized for display. Original photograph · License terms.

How Cleanroom Door Requirements Vary By Industry

A cleanroom opening may handle routine trolley transfers, occasional equipment moves or access between production areas. When selecting a high-speed roll-up door, account for the load, the space on either side and how the opening is used during production and cleaning. Explore SEPPES cleanroom door solutions for different site requirements.

Staff Entry And Material Staging

In a pharmaceutical suite, gowned staff may enter production from a changing area while supplies arrive through a separate material airlock. In medical device assembly, covered carts may wait between component staging and the assembly room. Mark the waiting points and any place where staff and goods cross, especially when a shift change coincides with a delivery.

Equipment Access And Sample Transfer

An electronics line may receive small trays throughout the shift, while a semiconductor service corridor may need to accommodate a much larger tool during maintenance. A laboratory can have a similar split between routine sample-cart movement and occasional instrument delivery. Check the turn into the doorway and the space needed to park or align the load on each side.

Hygiene Boundaries In Food Production

At the passage from wet preparation to dry packing, mark where rinse water or cleaning solution can reach the door frame and controls. Follow a loaded trolley during peak production. Note where it waits and how long it takes to clear the doorway, so the opening sequence can be reviewed against the actual transfer routine.

A cleanroom operator at the controls of a blue SEPPES high-speed roll-up door
SEPPES High-Speed Roll-Up Door Installation

02 / BEFORE YOU SPECIFY

Cleanroom Door FAQs

When Should I Specify A Double-Door Interlock?

Consider an interlock when a transfer area requires one door to stay closed while the other opens. Review who can request access, the normal sequence and the required response to emergencies or power loss with your facility team.

What Should I Measure Before Replacing A Cleanroom Door?

Measure the finished clear width and height, plus available headroom and side clearance. Send SEPPES photos of both sides and note any nearby equipment, utilities or ceiling obstructions.

How Does The Cleaning Method Affect Door Material Selection?

List the cleaning chemicals, dilution, contact time and whether staff wipe or rinse the opening. Check the proposed curtain, frame, seals and controls against that cleaning routine.

What Information Is Needed To Connect A Door To A Conveyor?

Provide the conveyor height and maximum load dimensions. Agree with the line integrator on the opening request, door position feedback and the response if a load stops in the opening.

What Pressure Details Should I Share For A Cleanroom Door?

Tell SEPPES which rooms the door connects, which side should be at higher pressure and the specified pressure difference. Include how often the door will open and any required recovery time for the room pressure after passage.

How Can I Avoid Unintended Openings With Touchless Entry?

Mark where staff approach the door and where other people walk past it. Consider a hand-wave switch when staff need to make a deliberate opening request. With approach sensors, check whether passers-by can trigger the door and verify passage protection separately.

03 / YOUR INDUSTRY. YOUR APPLICATION.

Tell Us About Your Facility

Share your industry, opening dimensions, traffic route and cleaning or room conditions so we can review the door arrangement with your project team.

Blank Form (#13)

Start Customizing Your Industrial Door

Let's have a chat