SEPPES Cleanroom
Door Interlock System

Door interlocking with SEPPES
A clearly defined opening sequence

Plan your cleanroom door interlock system with SEPPES. Define linked openings, the opening order and the door-state feedback required before the next movement.

Double-door interlockPharmaceutical installation

DOOR SEQUENCING

How a SEPPES cleanroom door interlock system works

ILLUSTRATIVE TWO-DOOR SEQUENCE01 / 04
Room AApproach
TransitionHolding space
Room BDestination
Door A · CLOSED
Door B · CLOSED

Both doors are closed. A request starts the permission check.

Concept diagram. Final door feedback, passage protection and release arrangements depend on the selected system.

INTERLOCK INSTALLATIONS

SEPPES door interlocks
Different arrangements

Two installation examples. Each starts with a defined door group and an agreed opening order.

Linked entrance and exit

Review entrance and exit permissions for clean room interlocking doors with SEPPES. Confirm the door states required before the next opening is permitted. For cleanroom entrances with frequent material movement, explore our stainless steel high speed door and review its available control interfaces when planning the interlock sequence.

Reference specifications

Operating speed
0.6–1.5 m/s
Standard curtain
1.2 mm
Control interface
I/O ports and 485 communication
Safety
Photoelectric sensor and safety bottom edge

Air-shower installation · entrance view
01 / 02

CONFIRM THE INTERLOCK CONDITIONS

Define your interlock
with SEPPES

These four points define the interlock brief: the door group, verified states, interrupted cycles and release conditions.

Control detail · the air-shower installation above
01

Linked doors and request priority

Identify every door in the group. Agree which request takes priority when two openings are requested together.

02

Confirmed door states

Specify the position feedback needed to permit the next movement. Review it alongside the selected door’s passage protection.

03

Interrupted movement or signal loss

Define the response to missing feedback or a door that does not reach its expected state. Include operator indication and recovery checks.

04

Release and restart

Agree emergency release, the response to a power interruption and the reset conditions before normal operation resumes.

INTERLOCK QUESTIONS

SEPPES cleanroom
door interlock FAQs

How do clean room interlocking doors work?

They apply agreed permission rules to linked openings. A request is checked against the relevant door states before movement is permitted. The next operation follows the agreed completion condition.

Can a 2 door interlock system include more doors?

Define the complete door group and the opening order, then review them with the selected controller. The supported arrangement depends on the proposed system, available feedback and required interfaces.

How does a cleanroom door interlock system handle simultaneous requests?

Agree which request has priority, whether the other request waits and what the operator sees. Include this condition in the control specification and commissioning checks.

What should a cleanroom door interlock system do during a fault?

Define the response to missing feedback, interrupted movement and power loss. Confirm the release method, operator indication and reset conditions before normal operation resumes.

LET’S DEFINE YOUR OPENING

Your process.
Your access.
Your solution.Cleanroom door solutions from SEPPES

Discuss custom cleanroom door solutions for your layout, cleaning process and traffic. Tell us what needs to move and what the room needs to control so we can review the configuration together.

leo@seppes.com.cn
  1. 01Share your layout and requirements
  2. 02Review the door and control arrangement
  3. 03Confirm the project specification

Cleanroom door interlock system enquiry

Fields marked * are required.

Blank Form (#13)
Cleanroom interlock installation
Blank Form (#13)

Start Customizing Your Industrial Door

Let's have a chat